close menu
5 January 2010

e2v CCD imaging sensors celebrate a decade of discovery on board XMM-Newton

On 10th December 1999, e2v Charge Coupled Device (CCD) imaging sensors were launched into space onboard Ariane 5 on the European Space Agency’s (ESA) x-ray Multi-Mirror Mission (XMM-Newton) X-ray observatory satellite. In its decade of operation the Space telescope has supplied masses of new data which has widened our knowledge of the universe.

The satellite itself carries six instruments, 5 of which are equipped with e2v CCDs:

The observatory has three imaging instruments called European Photon Imaging Cameras (EPIC), two of which were built by the University of Leicester. These each use seven e2v CCD22s, optimised for the application, which image extremely weak x-ray radiation and also detect the energy of each photon absorbed.

It also has two Reflection Grating Spectrometers (RGS) built by the Space Research Organisation of the Netherlands (SRON), which gives greater precision on detected photon energy. Each instrument uses nine e2v CCD15s which are back illuminated for maximum soft x-ray Quantum Efficiency (QE).

Finally it has an Optical Monitor (OM) built by MSSL using an e2v CCD02. This is a conventional but very sensitive optical/UV monitor, which can observe simultaneously the same regions as the x-ray telescopes, but in the ultraviolet and visible wavelengths.

Since Earth’s atmosphere blocks out all x-rays, only a space telescope can detect and study celestial x-ray sources and help scientists solve cosmic mysteries. XMM-Newton’s large collecting area and the ability to make long uninterrupted exposures provides highly sensitive observations; providing data that has furthered understanding of black holes, galaxy clusters, dark matter and the atmosphere of Mars, to name a few.

The large amounts of new data collected inspire more than 300 journal articles each year and it is estimated that 2,000 scientists routinely use XMM data (20% of all professional astronomers worldwide).

Although now in its 10th year of operation, the satellite is still in excellent condition and is said to have another 10 years of life ahead of it.

Brian McAllister, General Managing of Imaging at e2v said “We are delighted to be celebrating XMM-Newton’s 10th anniversary and the part that e2v imaging sensors have played in its success. The satellite has been vital in learning more about our universe and, with plenty more to study, looks set to continue to be an important source of data for astronomers for many years to come.”
 

Media contact e2v:
Jessica Broom
jessica.broom@e2v.com
Tel: +44 (0) 1245 453 607

NOTES FOR EDITORS:

e2v

e2v’s objective is to be a global leader in the design and supply of specialised components and sub-systems that enable the world’s leading systems companies to deliver innovative solutions for medical & science, aerospace & defence, and commercial & industrial markets.

e2v is organised into four divisions:

  • High performance electron devices and subsystems for applications including: defence electronic countermeasures, radiotherapy cancer treatment, radar systems, industrial heating, satellite communications amplifiers, digital television transmitters and high power RF systems.
  • Advanced CCD and CMOS imaging sensors and cameras for applications including: space, science and life science imaging, industrial process control, intra-oral and panoramic dental X-ray systems and military surveillance.
  • Specialist semiconductors, including logic, memory and microprocessors (in partnership with Freescale Semiconductor) for: high reliability mission-critical programmes in avionics, telecommunications and defence, sensor data acquisition, and high speed data conversion.
  • A range of professional sensing products for applications including: environmental safety, x-ray spectroscopy, automotive alarm and security systems, microwave radar and safety and arming devices, fire rescue and security thermal imaging.

For the year ended 31 March 2009, e2v achieved sales of £233m and is listed on the London Stock Exchange. In October 2008 e2v acquired QP semiconductor, a leading US-based designer and supplier of specialty semiconductor components used in military and aerospace applications, establishing e2v’s first US manufacturing base.

The Company is headquartered in the United Kingdom and has approximately 1700 employees in six production facilities across Europe and North America. e2v also operates a global network of sales and technical support offices, supported by local distributors and resellers.

Further information is available from www.e2v.com